Pthreads4w (A.K.A. PTHREADS4W) ================================== Pthreads4w is free software, distributed under the GNU Lesser General Public License (LGPL). See the file 'COPYING.LIB' for terms and conditions. Also see the file 'COPYING' for information specific to Pthreads4w, copyrights and the LGPL. What is it? ----------- Pthreads4w (a.k.a. pthreads4w) is an Open Source Software implementation of the Threads component of the POSIX 1003.1c 1995 Standard (or later) for Microsoft's Windows environment. Some functions from POSIX 1003.1b are also supported, including semaphores. Other related functions include the set of read-write lock functions. The library also supports some of the functionality of the Open Group's Single Unix specification, namely mutex types, plus some common and Pthreads4w specific non-portable routines (see README.NONPORTABLE). See the file "ANNOUNCE" for more information including standards conformance details and the list of supported and unsupported routines. Prerequisites ------------- MSVC or GNU C (MinGW or MinGW64 with AutoConf Tools) To build from source. QueueUserAPCEx by Panagiotis E. Hadjidoukas To support any thread cancellation in C++ library builds or to support cancellation of blocked threads in any build. This library is not required otherwise. For true async cancellation of threads (including blocked threads). This is a DLL and Windows driver that provides pre-emptive APC by forcing threads into an alertable state when the APC is queued. Both the DLL and driver are provided with the Pthreads4w.exe self-unpacking ZIP, and on the Pthreads4w FTP site (in source and pre-built forms). Currently this is a separate LGPL package to Pthreads4w. See the README in the QueueUserAPCEx folder for installation instructions. Pthreads4w will automatically detect if the QueueUserAPCEx DLL QuserEx.DLL is available and whether the driver AlertDrv.sys is loaded. If it is not available, Pthreads4w will simulate async cancellation, which means that it can async cancel only threads that are runnable. The simulated async cancellation cannot cancel blocked threads. [FOR SECURITY] To be found Quserex.dll MUST be installed in the Windows System Folder. This is not an unreasonable constraint given a driver must also be installed and loaded at system startup. Library naming -------------- Because the library is being built using various exception handling schemes and compilers - and because the library may not work reliably if these are mixed in an application, each different version of the library has it's own name. Please do not distribute your own modified versions of the library using names conforming to this description. You can use the makefile variable "EXTRAVERSION" to append your own suffix to the library names when building and testing your library. Note 1: the incompatibility is really between EH implementations of the different compilers. It should be possible to use the standard C version from either compiler with C++ applications built with a different compiler. If you use an EH version of the library, then you must use the same compiler for the application. This is another complication and dependency that can be avoided by using only the standard C library version. Note 2: if you use a standard C pthread*.dll with a C++ application, then any functions that you define that are intended to be called via pthread_cleanup_push() must be __cdecl. Note 3: the intention was to also name either the VC or GC version (it should be arbitrary) as pthread.dll, including pthread.lib and libpthread.a as appropriate. This is no longer likely to happen. Note 4: the compatibility number (major version number) was added so that applications can differentiate between binary incompatible versions of the libs and dlls. In general the naming format used is: pthread[VG]{SE,CE,C}[c][E].dll pthread[VG]{SE,CE,C}[c][E].lib where: [VG] indicates the compiler V - MS VC, or G - GNU C {SE,CE,C} indicates the exception handling scheme SE - Structured EH, or CE - C++ EH, or C - no exceptions - uses setjmp/longjmp c - DLL major version number indicating ABI compatibility with applications built against a snapshot with the same major version number. See 'Version numbering' below. E - EXTRAVERSION suffix. The name may also be suffixed by a 'd' to indicate a debugging version of the library. E.g. pthreadVC2d.lib. These will be created e.g. when the *-debug makefile targets are used. Examples: pthreadVC2.dll (MSVC/not dependent on exceptions - not binary compatible with pthreadVC1.dll or pthreadVC.dll) pthreadGC2-w32.dll (As built, e.g., by "make GC ARCH=-m32 EXTRAVERSION=-w32") pthreadVC2-w64.dll (As built, e.g., by "nmake VC ARCH=-m64 EXTRAVERSION=-w64") For information on ARCH (MinGW GNUmakefile) or TARGET_CPU (MSVS Makefile) see the respective "Building with ..." sections below. The GNU library archive file names have correspondingly changed, e.g.: libpthreadGCE2.a libpthreadGC2.a libpthreadGC2-w64.a Version numbering ----------------- See pthread.h and the resource file 'version.rc'. Microsoft version numbers use 4 integers: 0.0.0.0 Pthreads4w uses the first 3 following the standard major.minor.micro system. We had claimed to follow the Libtool convention but this has not been the case with recent releases. Binary compatibility and consequently library file naming has not changed over this time either so it should not cause any problems. NOTE: Changes to the platform ABI can cause the library ABI to change and the current version numbering system does not account for this. The fourth is commonly used for the build number, but will be reserved for future use. major.minor.micro.0 The numbers are changed as follows: 1. If the general binary interface (ABI) has changed at all since the last update in a way that requires recompilation and relinking of applications, then increment Major, and set both minor and micro to 0. (`M:m:u' becomes `M+1:0:0') 2. If the general API has changed at all since the last update or there have been semantic/behaviour changes (bug fixes etc) but does not require recompilation of existing applications, then increment minor and set micro to 0. (`M:m:u' becomes `M:m+1:0') 3. If there have been no interface or semantic changes since the last public release but a new release is deemed necessary for some reason, then increment micro. (`M:m:u' becomes `M:m:u+1') DLL compatibility numbering is an attempt to ensure that applications always load a compatible Pthreads4w DLL by using a DLL naming system that is consistent with the version numbering system. It also allows older and newer DLLs to coexist in the same filesystem so that older applications can continue to be used. For pre .NET Windows systems, this inevitably requires incompatible versions of the same DLLs to have different names. Pthreads4w has adopted the Cygwin convention of appending a single integer number to the DLL name. The number used is simply the library's major version number. Consequently, DLL name/s will only change when the DLL's backwards compatibility changes. Note that the addition of new 'interfaces' will not of itself change the DLL's compatibility for older applications. Which of the several dll versions to use? ----------------------------------------- or, --- What are all these pthread*.dll and pthread*.lib files? ------------------------------------------------------- Simple, use either pthreadGCc.* if you use GCC, or pthreadVCc.* if you use MSVC - where 'c' is the DLL versioning (compatibility) number. Otherwise, you need to choose carefully and know WHY. The most important choice you need to make is whether to use a version that uses exceptions internally, or not. There are versions of the library that use exceptions as part of the thread cancellation and exit implementation. The default version uses setjmp/longjmp. If you use either pthreadVCE[2] or pthreadGCE[2]: 1. [See also the discussion in the FAQ file - Q2, Q4, and Q5] If your application contains catch(...) blocks in your POSIX threads then you will need to replace the "catch(...)" with the macro "PtW32Catch", eg. #ifdef PtW32Catch PtW32Catch { ... } #else catch(...) { ... } #endif Otherwise neither pthreads cancellation nor pthread_exit() will work reliably when using versions of the library that use C++ exceptions for cancellation and thread exit. NB: [lib]pthreadGCE[2] does not support asynchronous cancellation. Any attempt to cancel a thread set for asynchronous cancellation using this version of the library will cause the applicaton to terminate. We believe this is due to the "unmanaged" context switch that is disrupting the stack unwinding mechanism and which is used to cancel blocked threads. See pthread_cancel.c Other name changes ------------------ All snapshots prior to and including snapshot 2000-08-13 used "_pthread_" as the prefix to library internal functions, and "_PTHREAD_" to many library internal macros. These have now been changed to "ptw32_" and "PTW32_" respectively so as to not conflict with the ANSI standard's reservation of identifiers beginning with "_" and "__" for use by compiler implementations only. If you have written any applications and you are linking statically with the Pthreads4w library then you may have included a call to _pthread_processInitialize. You will now have to change that to ptw32_processInitialize. Cleanup code default style -------------------------- Previously, if not defined, the cleanup style was determined automatically from the compiler used, and one of the following was defined accordingly: __CLEANUP_SEH MSVC only __CLEANUP_CXX C++, including MSVC++, GNU G++ __CLEANUP_C C, including GNU GCC, not MSVC These defines determine the style of cleanup (see pthread.h) and, most importantly, the way that cancellation and thread exit (via pthread_exit) is performed (see the routine ptw32_throw()). In short, the exceptions versions of the library throw an exception when a thread is canceled, or exits via pthread_exit(). This exception is caught by a handler in the thread startup routine, so that the the correct stack unwinding occurs regardless of where the thread is when it's canceled or exits via pthread_exit(). In this snapshot, unless the build explicitly defines (e.g. via a compiler option) __CLEANUP_SEH, __CLEANUP_CXX, or __CLEANUP_C, then the build NOW always defaults to __CLEANUP_C style cleanup. This style uses setjmp/longjmp in the cancellation and pthread_exit implementations, and therefore won't do stack unwinding even when linked to applications that have it (e.g. C++ apps). This is for consistency with most/all commercial Unix POSIX threads implementations. Although it was not clearly documented before, it is still necessary to build your application using the same __CLEANUP_* define as was used for the version of the library that you link with, so that the correct parts of pthread.h are included. That is, the possible defines require the following library versions: __CLEANUP_SEH pthreadVSE.dll __CLEANUP_CXX pthreadVCE.dll or pthreadGCE.dll __CLEANUP_C pthreadVC.dll or pthreadGC.dll It is recommended that you let pthread.h use it's default __CLEANUP_C for both library and application builds. That is, don't define any of the above, and then link with pthreadVC.lib (MSVC or MSVC++) and libpthreadGC.a (MinGW GCC or G++). The reason is explained below, but another reason is that the prebuilt pthreadVCE.dll is currently broken. Versions built with MSVC++ later than version 6 may not be broken, but I can't verify this yet. WHY ARE WE MAKING THE DEFAULT STYLE LESS EXCEPTION-FRIENDLY? Because no commercial Unix POSIX threads implementation allows you to choose to have stack unwinding. Therefore, providing it in pthread-win32 as a default is dangerous. We still provide the choice but unless you consciously choose to do otherwise, your pthreads applications will now run or crash in similar ways irrespective of the pthreads platform you use. Or at least this is the hope. Development Build Toolchains and Configurations ----------------------------------------------- As of Release 2.10 all build configurations pass the full test suite for the following toolchains and configurations: All DLL and static library build targets enabled in the makefiles: VC, VCE, VSE (DLL, inlined statics only) GC, GCE (DLL, inlined and small statics) MSVS: Intel Core i7 (6 Core HT) Windows 7 64 bit MSVS 2010 Express with SDK 7.1 (using the SDK command shell TARGET_CPU = x64 or x86) MSVS 2013 Express Cross Tools for x64 Command Prompt MSVS 2013 Express Native Tools for x32 Command Prompt GNU: Intel Core i7 (6 Core HT) Windows 7 64 bit MinGW64 multilib enabled (ARCH = -m64 or -m32) MinGW64 multilib disabled Building with MS Visual Studio (C, VC++ using C++ EH, or Structured EH) ----------------------------------------------------------------------- NOTE: A VS project/solution/whatever file is included as a contributed work and is not used of maintained in development. All building and testing is done using makefiles. We use the native make system for each toolchain, which is 'nmake' in this case. From the source directory run nmake without any arguments to list help information. E.g. $ nmake As examples, as at Release 2.10 the pre-built DLLs and static libraries can be built using one of the following command-lines: [Note: "setenv" comes with the SDK which is not required to build the library. I use it to build and test both 64 and 32 bit versions of the library. "/2003" is used to override my build system which is Win7 (at the time of writing) for backwards compatibility.] $ setenv /x64 /2003 /Release $ nmake realclean VC $ nmake realclean VCE $ nmake realclean VSE $ nmake realclean VC-static $ nmake realclean VCE-static $ nmake realclean VSE-static $ setenv /x86 /2003 /Release $ nmake realclean VC $ nmake realclean VCE $ nmake realclean VSE $ nmake realclean VC-static $ nmake realclean VCE-static $ nmake realclean VSE-static If you want to differentiate or customise library naming you can use, e.g.: $ nmake realclean VC EXTRAVERSION="-w64" The string provided via the variable EXTRAVERSION is appended to the dll and .lib library names, e.g.: pthreadVC2-w64.dll pthreadVC2-w64.lib To build and test all DLLs and static lib compatibility versions (VC, VCE, VSE): $ setenv /x64 /2003 /release $ nmake all-tests You can run the testsuite by changing to the "tests" directory and running nmake. E.g.: $ cd tests $ nmake VC Note: the EXTRAVERSION="..." option is passed to the tests Makefile when you target "all-tests". If you build the library then change to the tests directory to run the tests you will need to repeat the option explicitly to the test "nmake" command-line. For failure analysis etc. individual tests can be built and run, e.g: $ cd tests $ nmake VC TESTS="foo bar" This builds and runs all prerequisite tests as well as the individual tests listed. Prerequisite tests are defined in tests\runorder.mk. To build and run only the tests listed use: $ cd tests $ nmake VC NO_DEPS=1 TESTS="foo bar" Building with MinGW ------------------- NOTE: All building and testing is done using makefiles. We use the native make system for each toolchain, which is 'make' in this case. We have found that Mingw builds of the GCE library variants can fail when run on 64 bit systems, believed to be due to the DWARF2 exception handling being a 32 bit mechanism. The GC variants are fine. MinGW64 offers SJLJ or SEH exception handling so choose one of those. From the source directory: run 'autoheader' to rewrite the config.h file run 'autoconf' to rewrite the GNUmakefiles (library and tests) run './configure' to create config.h and GNUmakefile. run 'make' without arguments to list possible targets. E.g. $ autoheader $ autoconf $ ./configure $ make realclean all-tests With MinGW64 multilib installed the following variables can be defined either on the make command line or in the shell environment: ARCH - possible values are "-m64" and "-m32". You will probably recognise these as gcc flags however the GNUmakefile also converts these into the appropriate windres options when building version.o. As examples, as at Release 2.10 the pre-built DLLs and static libraries are built from the following command-lines: $ nmake realclean GC ARCH=-m64 $ nmake realclean GC ARCH=-m32 $ nmake realclean GCE ARCH=-m64 $ nmake realclean GCE ARCH=-m32 $ nmake realclean GC-static ARCH=-m64 $ nmake realclean GC-static ARCH=-m32 $ nmake realclean GCE-static ARCH=-m64 $ nmake realclean GCE-static ARCH=-m32 If you want to differentiate between libraries by their names you can use, e.g.: $ make realclean GC ARCH="-m64" EXTRAVERSION="-w64" The string provided via the variable EXTRAVERSION is appended to the dll and .a library names, e.g.: pthreadGC2-w64.dll libpthreadGC2-w64.a To build and test all DLLs and static lib compatibility variants (GC, GCE): $ make all-tests or, with MinGW64 (multilib enabled): $ make all-tests ARCH=-m64 $ make all-tests ARCH=-m32 You can run the testsuite by changing to the "tests" directory and running make. E.g.: $ cd tests $ make GC Note that the ARCH="..." and/or EXTRAVERSION="..." options are passed to the tests GNUmakefile when you target "all-tests". If you change to the tests directory and run the tests you will need to repeat those options explicitly to the test "make" command-line. For failure analysis etc. individual tests can be built and run, e.g: $ cd tests $ make GC TESTS="foo bar" This builds and runs all prerequisite tests as well as the individual tests listed. Prerequisite tests are defined in tests\runorder.mk. To build and run only those tests listed use: $ cd tests $ make GC NO_DEPS=1 TESTS="foo bar" Building under Linux using the MinGW cross development tools ------------------------------------------------------------ You can build the library on Linux by using the MinGW cross development toolchain. See http://www.libsdl.org/extras/win32/cross/ for tools and info. The GNUmakefile contains some support for this, for example: make CROSS=i386-mingw32msvc- clean GC will build pthreadGCn.dll and libpthreadGCn.a (n=version#), provided your cross-tools/bin directory is in your PATH (or use the cross-make.sh script at the URL above). Building the library as a statically linkable library ----------------------------------------------------- General: PTW32_STATIC_LIB must be defined for both the library build and the application build. The makefiles supplied and used by the following 'make' command lines will define this for you. MSVC (creates pthreadVCn.lib as a static link lib): nmake clean VC-static MinGW32 (creates libpthreadGCn.a as a static link lib): make clean GC-static Define PTW32_STATIC_LIB also when building your application. Building the library under Cygwin --------------------------------- Cygwin implements it's own POSIX threads routines and these will be the ones to use if you develop using Cygwin. Building applications --------------------- The files you will need for your application build are: The four header files: _ptw32.h pthread.h semaphore.h sched.h The DLL library files that you built: pthread*.dll plus the matching *.lib (MSVS) or *.a file (GNU) or, the static link library that you built: pthread*.lib (MSVS) or libpthread*.a (GNU) Place them in the appropriate directories for your build, which may be the standard compiler locations or, locations specific to your project (you might have a separate third-party dependency tree for example). Acknowledgements ---------------- See the ANNOUNCE file for acknowledgements. See the 'CONTRIBUTORS' file for the list of contributors. As much as possible, the ChangeLog file attributes contributions and patches that have been incorporated in the library to the individuals responsible. Finally, thanks to all those who work on and contribute to the POSIX and Single Unix Specification standards. The maturity of an industry can be measured by it's open standards. ---- Ross Johnson