LameXP/etc/NSIS/parameters.OFF

!ifndef __PREFIX__
  !define __PREFIX__ ""
!endif


; StrStr

Function ${__PREFIX__}StrStr
/*After this point:
  ------------------------------------------
  $R0 = SubString (input)
  $R1 = String (input)
  $R2 = SubStringLen (temp)
  $R3 = StrLen (temp)
  $R4 = StartCharPos (temp)
  $R5 = TempStr (temp)*/
 
  ;Get input from user
  Exch $R0
  Exch
  Exch $R1
  Push $R2
  Push $R3
  Push $R4
  Push $R5
 
  ;Get "String" and "SubString" length
  StrLen $R2 $R0
  StrLen $R3 $R1
  ;Start "StartCharPos" counter
  StrCpy $R4 0
 
  ;Loop until "SubString" is found or "String" reaches its end
  loop:
    ;Remove everything before and after the searched part ("TempStr")
    StrCpy $R5 $R1 $R2 $R4
 
    ;Compare "TempStr" with "SubString"
    StrCmp $R5 $R0 done
    ;If not "SubString", this could be "String"'s end
    IntCmp $R4 $R3 done 0 done
    ;If not, continue the loop
    IntOp $R4 $R4 + 1
    Goto loop
  done:
 
/*After this point:
  ------------------------------------------
  $R0 = ResultVar (output)*/
 
  ;Remove part before "SubString" on "String" (if there has one)
  StrCpy $R0 $R1 `` $R4
 
  ;Return output to user
  Pop $R5
  Pop $R4
  Pop $R3
  Pop $R2
  Pop $R1
  Exch $R0
FunctionEnd


; GetParameters
 ; input, none
 ; output, top of stack (replaces, with e.g. whatever)
 ; modifies no other variables.
 
Function ${__PREFIX__}GetParameters
  Push $R0
  Push $R1
  Push $R2
  Push $R3
 
  StrCpy $R2 1
  StrLen $R3 $CMDLINE
 
  ;Check for quote or space
  StrCpy $R0 $CMDLINE $R2
  StrCmp $R0 '"' 0 +3
    StrCpy $R1 '"'
    Goto loop
  StrCpy $R1 " "
 
  loop:
    IntOp $R2 $R2 + 1
    StrCpy $R0 $CMDLINE 1 $R2
    StrCmp $R0 $R1 get
    StrCmp $R2 $R3 get
    Goto loop
 
  get:
    IntOp $R2 $R2 + 1
    StrCpy $R0 $CMDLINE 1 $R2
    StrCmp $R0 " " get
    StrCpy $R0 $CMDLINE "" $R2
 
  Pop $R3
  Pop $R2
  Pop $R1
  Exch $R0
FunctionEnd


; GetParameterValue
; Chris Morgan<cmorgan@alum.wpi.edu> 5/10/2004
; -Updated 4/7/2005 to add support for retrieving a command line switch
;  and additional documentation
;
; Searches the command line input, retrieved using GetParameters, for the
; value of an option given the option name.  If no option is found the
; default value is placed on the top of the stack upon function return.
;
; This function can also be used to detect the existence of just a
; command line switch like /OUTPUT  Pass the default and "OUTPUT"
; on the stack like normal.  An empty return string "" will indicate
; that the switch was found, the default value indicates that
; neither a parameter or switch was found.
;
; Inputs - Top of stack is default if parameter isn't found,
;  second in stack is parameter to search for, ex. "OUTPUT"
; Outputs - Top of the stack contains the value of this parameter
;  So if the command line contained /OUTPUT=somedirectory, "somedirectory"
;  will be on the top of the stack when this function returns
;
; Register usage
;$R0 - default return value if the parameter isn't found
;$R1 - input parameter, for example OUTPUT from the above example
;$R2 - the length of the search, this is the search parameter+2
;      as we have '/OUTPUT='
;$R3 - the command line string
;$R4 - result from StrStr calls
;$R5 - search for ' ' or '"'

Function ${__PREFIX__}GetParameterValue
  Exch $R0  ; get the top of the stack(default parameter) into R0
  Exch      ; exchange the top of the stack(default) with
            ; the second in the stack(parameter to search for)
  Exch $R1  ; get the top of the stack(search parameter) into $R1
 
  ;Preserve on the stack the registers used in this function
  Push $R2
  Push $R3
  Push $R4
  Push $R5
 
  Strlen $R2 $R1+2    ; store the length of the search string into R2
 
  Call ${__PREFIX__}GetParameters  ; get the command line parameters
  Pop $R3                          ; store the command line string in R3
 
  # search for quoted search string
  StrCpy $R5 '"'      ; later on we want to search for a open quote
  Push $R3            ; push the 'search in' string onto the stack
  Push '"/$R1='       ; push the 'search for'
  Call ${__PREFIX__}StrStr         ; search for the quoted parameter value
  Pop $R4
  StrCpy $R4 $R4 "" 1   ; skip over open quote character, "" means no maxlen
  StrCmp $R4 "" "" next ; if we didn't find an empty string go to next
 
  # search for non-quoted search string
  StrCpy $R5 ' '             ; later on we want to search for a space since we
                             ; didn't start with an open quote '"' we shouldn't
                             ; look for a close quote '"'
  Push $R3                   ; push the command line back on the stack for searching
  Push '/$R1='               ; search for the non-quoted search string
  Call ${__PREFIX__}StrStr
  Pop $R4
 
  ; $R4 now contains the parameter string starting at the search string,
  ; if it was found
next:
  StrCmp $R4 "" check_for_switch ; if we didn't find anything then look for
                                 ; usage as a command line switch
  # copy the value after /$R1= by using StrCpy with an offset of $R2,
  # the length of '/OUTPUT='
  StrCpy $R0 $R4 "" $R2  ; copy commandline text beyond parameter into $R0
  # search for the next parameter so we can trim this extra text off
  Push $R0
  Push $R5                    ; search for either the first space ' ', or the first
                              ; quote '"'
                              ; if we found '"/output' then we want to find the
                              ; ending ", as in '"/output=somevalue"'
                              ; if we found '/output' then we want to find the first
                              ; space after '/output=somevalue'
  Call ${__PREFIX__}StrStr    ; search for the next parameter
  Pop $R4
  StrCmp $R4 "" done  ; if 'somevalue' is missing, we are done
  StrLen $R4 $R4      ; get the length of 'somevalue' so we can copy this
                      ; text into our output buffer
  StrCpy $R0 $R0 -$R4 ; using the length of the string beyond the value,
                      ; copy only the value into $R0
  goto done           ; if we are in the parameter retrieval path skip over
                      ; the check for a command line switch
 
; See if the parameter was specified as a command line switch, like '/output'
check_for_switch:
  Push $R3                  ; push the command line back on the stack for searching
  Push '/$R1'               ; search for the non-quoted search string
  Call ${__PREFIX__}StrStr
  Pop $R4
  StrCmp $R4 "" done        ; if we didn't find anything then use the default
  StrCpy $R0 ""             ; otherwise copy in an empty string since we found the
                            ; parameter, just didn't find a value
 
done:
  Pop $R5
  Pop $R4
  Pop $R3
  Pop $R2
  Pop $R1
  Exch $R0 ; put the value in $R0 at the top of the stack
FunctionEnd


; Wrapper macros

!if "${__PREFIX__}" != "un."
  !macro GetCommandlineParameter param default var
    Push "${param}"         ; push the search string onto the stack
    Push "${default}"       ; push a default value onto the stack
    Call GetParameterValue
    Pop ${var}
  !macroend
!else
  !macro un.GetCommandlineParameter param default var
    Push "${param}"         ; push the search string onto the stack
    Push "${default}"       ; push a default value onto the stack
    Call un.GetParameterValue
    Pop ${var}
  !macroend
!endif


!undef __PREFIX__